Search

Typical installation would be for use in conjunction with a turbine style jockey pump or where the jockey pump is capable of generating pressures which exceed the working pressure of the fire protection equipment or system. 

This valve is recommended only for use as a jockey pump relief valve, not a fire pump casing relief valve. 

Model FWC

Typically ships in 1-2 days.

The Kunkle Figure 20 relief valve is an all bronze angle pattern liquid pressure relief valve with a pressure tight cap. The cap is removed to expose a drive screw and lock nut which is used to adjust the valve to the desired pressure setting. 

(The Kunkle Figure 20 is neither UL Listed or FM approved and it is recommended that a Cla-Val 55L-60 be used for fire pump applications.)

3/4" MNPT x 3/4" FNPT

by Allenco

Great for Testing or Draining from 1-1/2" Angle Hose Valves or Fire Hose

1-1/2" FNST tapped with 3/4"  FNPT Hose Valve Cap with Drain

Optional 3/4" Garden Hose Adapter Available

Typically ships in 1-2 days.

by Allenco

Great for testing or draining from 2-1/2" angle hose valves or fire hose, and a variety of other uses!

• 2-1/2" Female NST with 3/4" Female NPT tap
• Includes 3/4" garden hose adapter

Typically ships in 1-2 days.

Transition your flanged jockey pump to a threaded pipe connection. Includes everything you need for both sides of the pump.

Note:  Includes 2 each 300# /250# flanges and bolt packs per kit

Typically ships in 1-2 business days.

4" Exposed 2-Way Grooved 
Fire Pump Test Connection
for 400 / 450 / 500 GPM Flow
by Allenco Fire 

For use with 400, 450, or 500 GPM Fire Pumps. 

Please see test header sizing guide below for more information. Per NFPA 20, where test header piping exceeds 15', the next larger pipe size shall be used.

Meets or exceeds NFPA requirements.

Typically ships in 1-2 days.

Select reducing size

• 4" x 2"
• 4" x 2-1/2"
• 4" x 3"

Typically Ships within 1-2 Days

Please select from available sizes

• 4" x 2"
• 4" x 2-1/2"
• 4" x 3"

Typically Ships within 1-2 Days

Our Allenco series AG-3000D dry utility gauges are an inexpensive commercial quality gauge suitable for use where precise pressure readings are not required. 

These gauges are manufactured to ANSI B.40.1 Grade B standards with 3-2-3% accuracy and do not meet the accuracy requirements of NFPA 20 for fire pump testing. These gauges are typically installed in fire pump installations to provide a general indication of pump pressures and performance.

Options

• Gauge Accessory Kit includes: (1) 1/4" Ball Valve, (1) 1/4" Street 90, and (1) 1/4" x 5" Nipple

• Cast Aluminum
• High Visibility Powder Coated Red Color
• Fits 4" Exposed Fire Pump Test Connections
• Meets or Exceeds NFPA Standards

1/4" MNPT x 1/4" FNPT Ball Valve

1/4" FNPT x 1/4" FNPT Ball Valve

1/4" x 5" NPT Black Nipple

1/4" FNPT x 1/4" MNPT Black Street 90

Our 4" Allenco series AG-1000L gauges are typically used as a hydrant gauge for flow testing and are available in the following ranges:

• 0-60 PSI
• 0-100 PSI
• 0-200 PSI
• 0-300 PSI
• 0-400 PSI
  

These high quality gauges are manufactured to ANSI B.40.1 Grade 1A standards, are 1% accurate over the entire gauge range and conform to NFPA 20-2010 (14.2.5.1.2) as it relates to gauge accuracy.

The standard glycerine filling helps to provide a steadier gauge reading while also lubricating the gauge movement which helps to extend the gauge life.

These gauges have a 4" dial, PSI scale, stainless steel case, brass internals, and bronze bourdon tube with 1/4" NPT lower connection.

Calibrated gauges include test report and serial number. Gauges are tagged with serial number, customer name and calibration date. Annual re-certification is available.

Calibrated Gauges typically ship in 2-3 business days

Optional Gauge Accessory Kit includes (1) 1/4" Ball Valve, (1) 1/4" Street 90, and (1) 1/4" x 5" Nipple.

Optional Quick Disconnect Kit protects your gauges during repeated temporary installations, includes (1) Female Quick Disconnect and (1) Male Quick Disconnect 

Maintenance Kits for AC Fire Pump Series 1580
Model: 1.5x1.5x7F
Vertical Inline Fire Pump

Please select the correct shaft size! 1-1/4" or 1-5/8" at the Impeller.

Our AC Fire Pump Repack Kits include all the items that are typically replaced during the routine repacking of these pump. Additional replacement parts are available by request. 

Original OEM Parts

If the current Glands on your pump are rusted, we recommend purchasing replacement Glands.

Please select pump size.
Motors with frame size 143JP through 184JP have an 1-1/4" shaft.
Motors with frame size 213JP through 215JP have an 1-5/8" shaft.
If you do not know the size of your pump, please email us a picture of your fire pump's name plate. 

For more information about these parts please visit our AC Fire Pump Series 1580 Vertical Inline Parts Guide 

eFirePump.com 1580 Series Repack Kits typically ship within 1-2 business days.

Minor and Major Repair Kits typically ship in 1-2 weeks.

The flange adapter with grooved end is designed to provide a grooved high pressure piping connection on the system side of the pump. 

• 150# Bolt Pattern
• 300# Working Pressure 
• 6" Grooved Connection x 4" Flanged Connection
• In Compliance with NFPA #20

Lead Time Typically 1-2 Weeks

• Cast Brass
• Available as Rough Brass, Polished Brass, Polished Chrome
• Fits 4" Exposed Fire Pump Test Connections
• Meets or Exceeds NFPA Standards
• 9-3/4" Outside Diameter 
• 4-1/2" Inside Diameter (for 4" connections)

7/16"-20 UNF for 1/4" SAE to 1/4" NPT Adapter  

Connections on pressure switch 7/16"-20 UNF for 1/4" SAE male flare connection. This adapter will allow you to use Alco PS1 pressure switches and other similar switches with pipe thread.

Calibrated Gauges typically ship in 2-3 business days

• Cast Aluminum
• High Visibility Powder Coated Red Color
• Fits 4" Exposed Fire Department Connections
• Meets or Exceeds NFPA Standards
• 9-3/4" Outside Diameter 
• 4-1/2" Inside Diameter (for 4" connections)

• Cast Aluminum
• High Visibility Powder Coated Red Color
• Fits 4" Exposed Fire Department Connections
• Meets or Exceeds NFPA Standards
• 9-3/4" Outside Diameter
• 4-1/2" Inside Diameter (for 4" connections)

• Cast Aluminum
• High Visibility Powder Coated Red Color
• Fits 4" Exposed Fire Department Connections
• Meets or Exceeds NFPA Standards
• 9-3/4" Outside Diameter 
• 4-1/2" Inside Diameter (for 4" connections)

• Cast Brass
• Available as Rough Brass, Polished Brass, Polished Chrome
• Fits 4" Exposed Fire Department Connections
• Meets or Exceeds NFPA Standards
• 9-3/4" Outside Diameter 
• 4-1/2" Inside Diameter (for 4" connections)

• Cast Brass
• Available as Rough Brass, Polished Brass, or Polished Chrome
• Fits 4" Exposed Fire Department Connections
• Meets or Exceeds NFPA Standards
• 9-3/4" Outside Diameter 
• 4-1/2" Inside Diameter (for 4" connections)

Allenco's Double Clapper 2-Way FDCs are UL Listed and FM Approved. They meet "Buy American" requirements and meet or exceed NFPA Standards. Each FDC includes matching plugs and wall plate.

• 4" FNPT x 2-1/2" FNST x 2-1/2" FNST
• Cast Brass, Polished Brass, or Polished Chrome
• Pin Lug Swivels
• Double Swing Clapper Design
• Includes "Auto Sprk" Wall Plate in Matching Finish (Alternate Lettering Available)
• Includes (2) Plugs with Chain in Matching Finish

Typically Ships in 1-2 Days

Allenco's Series AG-1000L-FP 1% accurate liquid filled fire gauges are specifically designed for use with fire pumps. 

Calibrated gauges include test report and serial number. Gauges are tagged with serial number, customer name and calibration date. Annual re-certification is available.

Calibrated Gauges typically ship in 2-3 business days

Options

• Gauge Accessory Kit includes: (1) 1/4" Ball Valve, (1) 1/4" Street 90, and (1) 1/4" x 5" Nipple
• Quick Disconnect Kit protects your gauges during repeated temporary installations. QD Kit includes: (1) Female Quick Disconnect and (1) Male Quick Disconnect

4" FM Approved Grooved, Flanged or Buttweld Connection Fire Pump
FM Approved by GVI 

Available GPM's

• 250 GPM
• 300 GPM
• 400 GPM
• 450 GPM

Minimum dial / meter GPM range 50% of rated GPM.  Maximum dial / meter GPM Range 200% of rated GPM

NOTE:  Optional scales such as LPM are available.  Please contact us with your special requirements.

1-1/4" Threaded Fire Pump Flow Meter
by GVI 

Available GPM's

• 25

NOTE:  Optional scales such as LPM are available.  Please contact us with your special requirements.

Maintenance Kits for AC Fire Pump Series 1580
Model: 3x3x7F 
Vertical Inline Fire Pump

Please select the correct shaft size! 1-1/4" or 1-5/8" at the Impeller.

Our AC Fire Pump Repack Kits include all the items that are typically replaced during the routine repacking of these pump. Additional replacement parts are available by request. 

Original OEM Parts

If the current Glands on your pump are rusted, we recommend purchasing replacement Glands.

Please select pump size.
Motors with frame size 143JP through 184JP have an 1-1/4" shaft.
Motors with frame size 213JP through 256JP have an 1-5/8" shaft.
If you do not know the size of your pump, please email us a picture of your fire pump's name plate. 

For more information about these parts please visit our AC Fire Pump Series 1580 Vertical Inline Parts Guide 

eFirePump.com 1580 Series Repack Kits typically ship within 1-2 business days.

Minor and Major Repair Kits typically ship in 1-2 weeks.

4" Exposed 2-outlet Flanged Fire Pump Test Connection
for 400 / 450 / 500 GPM Flow
by Allenco Fire 

For use with 400, 450, or 500 GPM Fire Pumps. 

Please see test header sizing guide below for more information. Per NFPA 20, where test header piping exceeds 15', the next larger pipe size shall be used.

Meets or exceeds NFPA requirements.

Typically ships in 1-2 days.

• Specifically designed for fire sprinkler system pressure gauges 
• One 1/4" inlet and two 1/4" outlets
• Allows for replacement of the system gauge without shutting down the water supply to the sprinkler system 
• Test system pressure with an additional gauge through the second outlet
• UL Listed