4" Exposed 2-Way Grooved
Fire Pump Test Connection
for 400 / 450 / 500 GPM Flow
by Allenco Fire
For use with 400, 450, or 500 GPM Fire Pumps.
Please see test header sizing guide below for more information. Per NFPA 20, where test header piping exceeds 15', the next larger pipe size shall be used.
Meets or exceeds NFPA requirements.
Typically ships in 1-2 days.
6" Exposed 4-Way Grooved
Fire Pump Test Connection
for 500 / 750 / 1000 GPM Flow
by Allenco Fire
For use with 500, 750, or 1000 GPM Fire Pumps.
Please see test header sizing guide below for more information. Per NFPA 20, where test header piping exceeds 15', the next larger pipe size shall be used.
Meets or exceeds NFPA requirements.
Typically ships in 1-2 days.
8" Exposed 4-Way or 6-Way Grooved
Fire Pump Test Connection
for 1250 / 1500 / 2000 GPM Flow
By Allenco Fire
For use with 1250, 1500, or 2000 GPM Fire Pumps.
Please see test header sizing guide below for more information. Per NFPA 20, where test header piping exceeds 15', the next larger pipe size shall be used.
Meets or exceeds NFPA requirements.
Typically ships in 1-2 days.
Includes 2-1/2" Angle Valve, Plate and Cap.
All threads are either NST or NPT.
Meets or exceeds NFPA requirements.
Typically ships in 1-2 days.
Includes 2-1/2" Gate Valve, Plate and Cap.
All threads are either NST or NPT.
Meets or exceed NFPA requirements.
Typically ships in 1-2 days.
Includes 2-1/2" FNPT x 2-1/2" MNST Adapter, Swivel Gate Valve, Cap, and Plate
Removeable Swivel Gate Valve is 2-1/2" FNST x 2-1/2" MNST and is furnished Rough Brass for all finishes.
All threads are either NST or NPT.
Meets or Exceeds NFPA Requirements.
Typically ships in 1-2 days.
Includes 3" FNPT inlet x 2-1/2" MNST outlet Gate Valve, Plate and Cap.
All threads are either NST or NPT.
Meets or exceeds NFPA requirements
Typically ships in 1-2 days.
Single Outlet Fire Pump Test Connection
w/out Valve
by Allenco Fire
Includes 3" FNPT inlet x 2-1/2" MNST outlet Adapter, Plate and Cap.
All threads are either NST or NPT.
This test connection is for use with pump room control valve.
Meets or exceeds NFPA requirements.
Typically ships in 1-2 days.
10" Exposed 12-Way Grooved
Fire Pump Test Connection
for 2500 / 3000 / 3500 GPM Flow
by Allenco Fire
For use with 2500, 3000, or 3500 GPM Fire Pumps.
Please see test header sizing guide below for more information. Per NFPA 20, where test header piping exceeds 15', the next larger pipe size shall be used.
Meets or exceeds NFPA requirements.
Typically ships in 1-2 days.
Single Outlet Fire Pump Test Connection
w/ Removeable Gate Valve
by Allenco Fire
Includes 3" FNPT x 2-1/2" MNST Adapter, Swivel Gate Valve, Cap, and Plate
Removeable Swivel Gate Valve is 2-1/2" FNST x 2-1/2" MNST and is furnished Rough Brass for all finishes.
All threads are either NST or NPT.
Meets or exceeds NFPA requirements.
Typically ships in 1-2 days.
Recommended Fire Pump Test Connection Size or Flow Meter Size Based on Fire Pump GPM per NFPA.
Please refer to our Test Header and Flow Meter categories for purchasing information.
Download the PDF below for free or add to cart for a laminated copy mailed to you.
The universal hose valve cap with chain is compatible with most 2-1⁄2” sized hose valves*. The cap is simply pushed onto the outlet, can be installed without any tools, and is engineered to be removed and put back in place several times without compromising the level of protection it delivers to the threads and against buildup of debris.
*Not Suitable for 2-1/2" RCH Angle Hose Valve
NOT SUITABLE FOR PRESSURE TESTING!
Installation
Make sure the valve outlet and male threads are free from debris. Push the cap
onto the valve until tight. Attach chain to the valve body at the point provided by
the valve manufacturer.
CAUTION: PLASTIC HOSE VALVE CAPS ARE FOR PROTECTION OF THE
MALE THREAD ONLY. DO NOT PRESSURIZE PLASTIC HOSE VALVE CAPS.
SERIOUS BODILY INJURY WILL OCCUR.
Typically ships in 1-2 days.
