Jockey Pumps

Jockey Pumps

        • 3/4" Cash Acme Jockey Pump Pressure Relief Valve


          Typical installation would be for use in conjunction with a turbine style jockey pump or where the jockey pump is capable of generating pressures which exceed the working pressure of the fire protection equipment or system. 

          This valve is recommended only for use as a jockey pump relief valve, not a fire pump casing relief valve. 

          Model FWC


          Typically ships in 1-2 days.

          0.0
          Add first review
          Not rated yet
              • Kunkle 3/4" Figure 20 Fire/Jockey Pump Casing Relief Valve - 50-150 PSI


                The Kunkle Figure 20 relief valve is an all bronze angle pattern liquid pressure relief valve with a pressure tight cap. The cap is removed to expose a drive screw and lock nut which is used to adjust the valve to the desired pressure setting. 

                (The Kunkle Figure 20 is neither UL Listed or FM approved and it is recommended that a Cla-Val 55L-60 be used for fire pump applications.)

                3/4" MNPT x 3/4" FNPT

                0.0
                Add first review
                Not rated yet
                    • Allenco Fire & Jockey Pump 1/2" Sensing Line Kit - Copper

                      Fire Pump Sensing Line Kit
                      Sweat Copper Version
                      by Allenco Fire Protection Products 

                      Allenco Sensing Line Kits for Fire Pumps and Jockey Pumps make installation and purchasing EASY! Includes everything you need (except pipe) to install your sensing line.  

                      Includes all 1/2" and 1/4" threaded brass fittings typically required to install a fire pump or jockey pump pressure sensing line. 

                      • Globe Valves
                      • All Necessary Sweat and Threaded Adapter Fittings 
                      • Orifice Unions 
                      • Pipe Hangers 
                      • Strut Clamps
                      • 0-300 PSI Utility Water Gauge
                      • Suggested Installation Drawing

                      Copper tubing and strut is not provided.


                      Optional Soldering Kit includes;

                      • 1 each copper tube cutter 
                      • 1 each 1.7 oz paste flux 
                      • 1 each 1/4 LB solder spool 95/5 lead free 
                      • 2 yds Emery cloth 
                      • 2 each 1/2" Copper tube cleaning brush 
                      • 2 each Acid/flux brush 
                      0.0
                      Add first review
                      Not rated yet
                          • Allenco Fire & Jockey Pump 1/2" Sensing Line Kit - Brass

                            Fire Pump Sensing Line Kit
                            Threaded Brass Version
                            by Allenco Fire Protection Products 

                            Allenco Sensing Line kits for Fire Pumps and Jockey Pumps make installation and purchasing EASY! Includes everything you need (except pipe) to install your sensing line. 

                            Includes all 1/2" and 1/4" threaded brass fittings typically required to install a fire pump or jockey pump pressure sensing line. 

                            • Globe Valves
                            • All Necessary Brass Fittings 
                            • Orifice Unions 
                            • Pipe Hangers 
                            • Strut Clamps
                            • 0-300 PSI Utility Water Gauge
                            • Suggested Installation Drawing

                            Pipe Not Included

                            0.0
                            Add first review
                            Not rated yet
                                • Kunkle 3/4" Figure 20 Fire/Jockey Pump Casing Relief Valve - 100-300 PSI


                                  The Kunkle Figure 20 relief valve is an all bronze angle pattern liquid pressure relief valve with a pressure tight cap. The cap is removed to expose a drive screw and lock nut which is used to adjust the valve to the desired pressure setting. 

                                  (The Kunkle Figure 20 is neither UL Listed or FM approved and it is recommended that a Cla-Val 55L-60 be used for fire pump applications.)

                                  3/4" MNPT x 3/4" FNPT



                                  0.0
                                  Add first review
                                  Not rated yet

                                Bestsellers

                                Footer navigation