Fire Pumps & Jockey Pumps

Fire Pump Sensing Line Kit
Sweat Copper Version
by Allenco Fire Protection Products 

Allenco Sensing Line Kits for Fire Pumps and Jockey Pumps make installation and purchasing EASY! Includes everything you need (except pipe) to install your sensing line.  

Includes all 1/2" and 1/4" threaded brass fittings typically required to install a fire pump or jockey pump pressure sensing line. 

• Globe Valves
• All Necessary Sweat and Threaded Adapter Fittings 
• Orifice Unions 
• Pipe Hangers 
• Strut Clamps
• 0-300 PSI Utility Water Gauge
• Suggested Installation Drawing

Optional Soldering Kit includes;

• 1 each copper tube cutter 
• 1 each 1.7 oz paste flux 
• 1 each 1/4 LB solder spool 95/5 lead free 
• 2 yds Emery cloth 
• 2 each 1/2" Copper tube cleaning brush 
• 2 each Acid/flux brush 

Complete KTR UL Listed Fire Pump Coupling

PLEASE USE THE ATTACHED SIZING GUIDE TO SELECT YOUR SIZE COUPLING.  

WE WILL CONFIRM SELECTION BASED ON INFORMATION PROVIDED, PLEASE PROVIDE AS MUCH INFORMATION AS POSSIBLE

IF YOU ARE UNSURE, PLEASE CONTACT US FOR ASSISTANCE

ROTEX® – couplings are designed to transmit torque between drive and driven components via curved jaw hubs and elastomeric elements, commonly known as spiders. The combination of these components provides dampening and accommodation for misalignments. This product is available in a variety of mounting configurations to meet your specific needs.

KTR ROTEX® couplings are UL Listed and meet the requirements of NFPA 20 - Standard for Installation of Stationary Pumps for Fire Protection, and by completing the required endurance testing of UL 448A, flexible couplings and connecting shafts for stationary fire pumps.

KTR ROTEX couplings are not specifically FM approved, but, they conform to FM Global Property loss prevention Data Sheet 3.7, Section 2.4.4.3 (revision October 2021) which states "Connect the fire pump and driver with a rigid coupling, flexible coupling, or flexible connecting shaft.  Do not use all elastomeric couplings...."