- 1% less
Aleum 1” Spring Loaded Check Valve
- Threaded
- Spring loaded
- 400 PSI Rating
- Cast Brass
Typically ships in 1-2 days.
Typically ships in 1-2 days.
Threaded
Spring loaded
400 PSI Rating
Cast Brass
Typically ships in 1-2 days.
Typically ships in 1-2 days.
Typically ships in 1-2 days.
Typically ships in 1-2 days.
Typically ships in 1-2 days.
Typically ships in 1-2 days.
Typically ships in 1-2 days.
The solid brass ball drip is a “ball” type check valve. When properly installed, the internal ball rests in the lower most area of the valve body allowing for proper drainage of moisture accumulation. Upon system pressurization, the internal ball is “pushed” into the small end of the ball drip body closing the opening. When system pressure is removed, the ball returns to its original position. One of the most common uses is on the dry side of the Fire Department Connection valve. This use helps keep moisture from accumulating inside the Fire Department Connection. Designed for horizontal installation only.